ZX/ZC/ZS/A1-S1 Series Standard Evaporative Air Cooler

This wall-mounted standard evaporative air cooler series includes six complete models with fixed 18000 m³/h airflow, sorted by 3 air outlet directions (downward ZX / side ZC / top ZS) and 2 grades of mechanical control (A-class / S-class). It adopts integrated anti-aging PP cabinet, matched with 1.1kW F-class axial-flow motor and 25L built-in water tank, widely applied to medium & large factories, supermarkets, schools and agricultural greenhouses covering 100–150 ㎡.

Core Product Features

Material & Structural Properties

· Integrated thickened anti-aging PP plastic cabinet, wall hoisting installation design; detachable angle iron wall mount bracket is an optional non-standard accessory. Three air outlet layouts adapt different on-site wall height, beam and overhead pipeline conditions: downward air outlet (ZX, recommended priority if installation space permits), side air outlet (ZC), top air outlet (ZS).

· Two independent mechanical control grades for all models:

A-Class Mechanical Controller: Single fixed wind speed, supports cooling, regular cleaning, ventilation and swing wind functions; only equipped with phase loss protection, cost-effective for general low-risk industrial workshops.

S-Class Mechanical Controller: Single fixed wind speed, with full multi-protection including phase loss, overload, short-circuit and electric leakage, higher safety standard for chemical, metal processing and high-hazard production workshops.

· Dedicated 1.1kW F-class insulated axial-flow motor with IP54 dustproof & waterproof protection grade, outstanding high temperature & humidity resistance, high efficiency, low noise and stable 24-hour non-stop industrial operation, matched with 380V three-phase industrial power supply. Max static pressure reaches 180Pa for long-distance cool wind delivery.

· Optimized fluid mechanics axial-flow plastic fan wheel, smooth air duct to reduce wind resistance, balanced air intake & outlet for uniform wide-area cooling coverage.

· Built-in 25L environmental PP anti-aging water tank; under medium wind cooling mode, full water supports continuous operation for 6–8 hours, reserved tap water inlet interface for automatic water replenishment refitting.

· Thickened high-density special corrugated honeycomb cooling pad made of new polymer composite material, featuring ultra-high water absorption, mildew resistance, anti-aging and long service life.

· Foldable closed air inlet shutter blocks dust and insects during standby, easy to disassemble for daily cleaning maintenance.

· Intelligent water shortage protection system for both control versions: water pump and cooling functions auto shut down with alarm reminder when tank lacks water to avoid dry burning damage to cooling pad.

Core Advantages

· Three Optional Air Outlet Directions: Downward / side / top air outlet to flexibly match different workshop space layouts; downward outlet delivers the most balanced indoor air circulation effect.

· Dual Safety-Grade Mechanical Controllers: A-class basic phase-loss protection for conventional factories with lower budget; S-class full multi-protection for workshops with strict electrical safety requirements.

· Wall-Mounted Space-Saving Design: Hoisting installation does not occupy factory production floor space, effectively saving ground area for production lines.

· 18000 m³/h Large Air Volume & Stable Static Pressure: Matches cooling demand of 100–150 square meters medium-large workshops, shopping malls and breeding greenhouses.

· Diversified Wide Application Scenarios: Suitable for high-temperature processing factories, crowded commercial venues, dust-free coating booths and agricultural planting greenhouses.

· Stable All-Day Continuous Operation: F-class high temperature resistant motor + thickened cooling pad structure, low failure rate for long-time non-stop factory cooling.

Usage Restrictions

Only applicable for indoor and shaded semi-open industrial, agricultural and commercial ventilation cooling scenarios; avoid long-term direct sunlight exposure. Only clean tap water can be filled into the water tank; corrosive, oily and chemical liquids are prohibited.

Model Selection

Six configurable complete specifications:

ZX/A1-18: A-class mechanical control + downward air outlet

ZX/S1-18: S-class mechanical control + downward air outlet

ZC/A1-18: A-class mechanical control + side air outlet

ZC/S1-18: S-class mechanical control + side air outlet

ZS/A1-18: A-class mechanical control + top air outlet

ZS/S1-18: S-class mechanical control + top air outlet Standard set includes cooling pad, dustproof air-in shutter, motor and control box; wall mounting bracket is optional extra accessory.